Honda bf50d - LRT and XRT Types (Remote Control); Side-Mount Control Type

51
OPERATION
LRT and XRT Types
(remote control)
Side-Mount Control Type
[standard equipment (LRTC
type)]
[optional equipment (LRTA and
XRTA types)]
1. Put the emergency stop switch clip
in the emergency stop switch, and
securely to the operator or to the
operator’s PFD (Personal Flotation
Device).
The engine will not start or run
unless the emergency stop switch
clip is in the emergency stop
switch.
The emergency stop switch clip
and emergency stop switch lanyard
system is a safety device that will
stop the engine if you fall away
from the controls while operating
the boat.
Always attach the emergency stop
switch lanyard securely to the
operator or to the operator’s PFD
before starting the engine.
2. Set the control lever in the N
(neutral) position.
The engine will not start if the F
(forward) or R (reverse) gears are
engaged.
EMERGENCY STOP
SWITCH
EMERGENCY STOP
SWITCH CLIP
EMERGENCY STOP
SWITCH LANYARD
CONTROL LEVER
N (neutral)
31ZZ46240.book Page 51 Tuesday, July 22, 2014 10:00 AM