79
SERVICING YOUR OUTBOARD MOTOR
Engine Oil Change
An engine oil evacuation device may
be used to remove the engine oil.
Drain the used oil while the engine is
warm. Warm oil drains quickly and
completely.
1. Unlatch and remove the engine
cover (p. 76). Remove the oil filler
cap (p. 77).
2. Loosen the drain bolt cover screw
using a flat blade screwdriver and
remove the drain bolt cover.
3. Place the drain bolt cover as shown
to use it as an oil drain guide. Place
a suitable container under the
guide.
DRAIN BOLT
COVER SCREW
DRAIN BOLT
COVER
DRAIN BOLT COVER
(oil drain guide)
31ZZ46240.book Page 79 Tuesday, July 22, 2014 10:00 AM
To Next Page
Loading...
