148
uuIndicatorsuDriver Information Interface Warning and Information Messages
Message Condition Explanation
• Appears when Auto Power OFF is disabled.
2 POWER Button P. 197
• Appears when the charging connector has failed. • Disconnect the charging connector using the release
cord.
2 If You Cannot Disengage the Charging Connector
P. 673
●
Appears when the charging connector is connected
to the inlet.
●
The vehicle does not move while the charging
connector is plugged into the inlet.
• Appears after you set the power mode to VEHICLE
OFF without connecting the charging connector
while the ambient temperature is low.
• Connecting the charging connector improves cold
startability.
20 2EX JSS (KE KG)-32TYF6000.book 148 ページ 2020年3月6日 金曜日 午後6時58分