uuOperating the Switches Around the Steering WheeluLights
202
When the headlights are on, push the lever forward. Pull the lever back to return to
low beams.
■
Flashing the high beams
Pull the lever back to switch on the high
beams.
u Release the lever to return to low beams.
The turn signals can be used when the power
mode is in ON.
■
: Turn signal
Push the lever up or down based on the
direction you want to turn, and the turn signal
will blink.
■
: One-touch turn signal
When you lightly push the lever up or down
and release it, the turn signal will blink 3 times.
u If you lightly push the lever in the
opposite direction while it is blinking, the
blinking will stop.
■
High Beams
1Headlights/Position Lights
Your vehicle is equipped with the automatic
headlight adjusting system that automatically adjusts
the vertical angle of the low beam headlights. If you
find a significant change in the vertical angle of the
headlights, there may be a problem with the system.
Have your vehicle checked by a dealer.
The position lights and the door outer handle
ambient lights and charge lamp will light up in the
following situations. It will turn off shortly.
• The keyless remote is brought close to the vehicle
• The driver’s door is unlocked
• Any door is opened
• The power mode is turned to OFF
However, if the door of the vehicle is locked for over
a week, even if the keyless remote is brought close to
the vehicle, they will not light up.
■
Turn Signals
1Turn Signals
The turn signal indicator on the instrument panel will
blink when the external turn signal blinks.
2 Indicators P. 106
20 2EX JSS (KE KG)-32TYF6000.book 202 ページ ２０２０年３月６日 金曜日 午後６時５８分
To Next Page