Continued
401
uuWhen DrivinguSingle Pedal Control
Using the accelerator pedal, you can adjust the speed of the vehicle while moving
forwards or backwards.
In addition, if you let up on the accelerator, you can slow down the vehicle without
using the brake pedal, and after stopping, it will keep the vehicle stopped. If you
press the accelerator pedal, the function will be cancelled and the vehicle will move.
The automatic brake hold indicator comes on
while the vehicle is stopped.
If the vehicle is stopped for 10 minutes or
more, the parking brake will be automatically
applied.
When the vehicle does not decelerate enough
even if you release the accelerator pedal,
depress the brake pedal.
■
System Operation
1System Operation
If a Single Pedal Control Problem. Depress Brake
Pedal When Decelerating And Parked. warning
message displays on the driver information interface,
immediately depress the brake pedal.
If the following displays, there may be a problem with
the system.
Have your vehicle inspected by a dealer immediately.
When the system is ON, the vehicle will not creep.
When using the system, just like with foot brakes or
other regenerative brakes, there will be wear on the
brake pads.
You may hear the system when it is in operation.
a Automatic Brake Hold Indicator
20 2EX JSS (KE KG)-32TYF6000.book 401 ページ ２０２０年３月６日 金曜日 午後６時５８分
To Next Page
Loading...
