Honda E - Page 435

uuHonda SensinguCollision Mitigation Braking System (CMBS)
434
Driving
You can switch the system on and off from the audio/information screen.
2 Driver Assist System On and Off P. 326
You can also turn the system on and off by the
following procedure:
1. Press the button on the steering wheel.
2. Roll the left selector wheel and select
Safety Support, then press the left
selector wheel.
3. Roll the left selector wheel and select
Collision Mitigation Braking System,
then press the left selector wheel.
u The message appears on the driver
information interface when the system
becomes on or off.
u A tick appears in the box and the colour
of the symbol changes green when
the system is on. The tick disappear and
the colour of the symbol changes
gray when the system is off.
The CMBS is turned on every time you start
the power system, even if you turned it off the
last time you drove the vehicle.
■
CMBS On and Off
1CMBS On and Off
The CMBS may automatically shut off, and the safety
support indicator will come and stay on under certain
conditions:
2 CMBS Conditions and Limitations P. 435
When the CMBS is activated, it will continue to
operate even if the accelerator pedal is partially
depressed. However, it will be cancelled if the
accelerator pedal is deeply depressed.
20 2EX JSS (KE KG)-32TYF6000.book 434 ページ ２０２０年３月６日 金曜日 午後６時５８分