Honda E - Page 568

Continued
567
uuCharginguCharge the High Voltage battery using a AC or CCS2 DC charger
Driving
5. Open the charge lid.
6. Open the inlet cap.
7. To connect the cable to the vehicle.
u The charge lamp on the charge lid blinks
(blue).
1How to Charge (AC)
To avoid damage to the charger, take these
precautions:
• Do not hit the charge connector components with
a hard object or drop them on the ground.
• Do not pull, twist, tangle, drag or step on the
charging cable.
• Do not use or store near any sources of heat.
• Do not expose to liquids or use harsh chemicals to
clean.
If the charging connector does not disengage, do not
engage it forcefully, and follow the procedures
mentioned in the following page.
2 If You Cannot Disengage the Charging
Connector P. 673
Charge connector release control
Press the release button with keyless remote.
Press the release button.
When vehicle is locked
When vehicle is unlocked
a Charge Lid
b Inlet Cap
a Charge Lamp (blue)
20 2EX JSS (KE KG)-32TYF6000.book 567 ページ ２０２０年３月６日 金曜日 午後６時５８分