Honda E - Page 567

uuCharginguCharge the High Voltage battery using a AC or CCS2 DC charger
566
Driving
1. Stop your vehicle at a station specific for
electric vehicles. Park with the charge lid
closest to the charge plug, just in front of
the bonnet.
2. Put the transmission into
(P
3. Turn off the power system.
4. Press and hold the charge lid release button
or lid open button.
u The lid opens.
2 Key P. 172
u The charge lamp (white) inside the
charge lid comes on for about 100
seconds.
■
How to Charge (AC)
1How to Charge (AC)
The charge speed slows down towards the
completion of the battery charging.
The charge lid can also be opened by audio/
information screen.
2 EV Menu P. 321
The High Voltage battery may not be charged even if
the charge connector is properly connected to the
vehicle’s inlet when the charging timer is set but the
timer has not yet started.
Be sure to follow the instructions and safety
precautions provided with the AC charging
equipment.
If you unplug the charging connector from the inlet,
charging cancels automatically.
Lid open button control
Press lid open button with keyless remote.
Press lid open button.
When vehicle is locked
When vehicle is unlocked
a Charge Lid Release Button
b Lid Open Button
20 2EX JSS (KE KG)-32TYF6000.book 566 ページ ２０２０年３月６日 金曜日 午後６時５８分