606
uuChecking and Maintaining Wiper BladesuChanging the Front Wiper Blade Rubber
6. Pull the wiper blade in the opposite
direction to slide it out of the holder.
7. Insert the flat side of the new wiper blade
onto the bottom part of the holder. Insert
the blade all the way.
8. Install the end of the wiper blade into the
cap.
9. Slide the holder onto the wiper arm until it
locks.
10. Lower both wiper arms.
11. Set the power mode to ON and hold the
wiper switch in the MIST position until
both wiper arms return to the standard
position.
20 2EX JSS (KE KG)-32TYF6000.book 606 ページ ２０２０年３月６日 金曜日 午後６時５８分
To Next Page
Loading...
