Continued
91
uuChild SafetyuSafety of Infants and Small Children
A lower anchorage-compatible child restraint system can be installed in either of the
two rear seats. A child restraint system is attached to the lower anchorages with
either the rigid or flexible type of connectors (see illustrations).
1. Locate the anchor marks affixed to the base
of the seat cushion.
2. Pull out the anchorage covers under the
marks to expose the lower anchorages.
u See illustration.
■
Installing a Lower Anchorage-Compatible Child Restraint System
1Installing a Lower Anchorage-Compatible Child Restraint System
Some child restraint systems come with optional
guide-cups, which avoid possible damage to the seat
surface. Follow the manufacturer’s instructions when
using the guide-cups, and attach them to the lower
anchorages as shown in the image.
Never attach two child restraint systems to
the same anchor. In a collision, one anchor
may not be strong enough to hold two
child restraint system attachments and may
break, causing serious injury or death.
a Lower Anchorages
b Guide-cup
20 2EX JSS (KE KG)-32TYF6000.book 91 ページ ２０２０年３月６日 金曜日 午後６時５８分
To Next Page
Loading...
