Honda Miimo HRM310 - Mowing Start Points Setup

3 PREPARATION
17
Setting up the lawn mower
Confi guring the settings through the setup wizard
The setup wizard will guide you to confi gure the settings for your mowing operation as follows:
Menu name Usage Confi guring and testing the settings
[1.Lawn layout] For confi guring the settings related to
the layout of the boundary wire. These
setting values are referred from the
other settings.
- Direction for the lawn mower to dock to
the docking station
- Length of the boundary wire
- Lawn size
- Existence of narrow passages
[2.Mowing start
points]
For confi guring the mowing start point
settings to enable the lawn mower to
start mowing from other areas.
- Direction of the mowing start points
- Distance of the start points from the
docking station
- Ratio with which the lawn mower operates
in each area
[3.Test start points] For testing the start points confi gured
in [2.Mowing start points] menu.
- Testing the setting of each start point
[4.Work timer]
For setting the work timer to operate the
lawn mower according to the schedule.
- Work day and work time
NOTE:
- Before starting the setup wizard, confi rm that both the docking station and boundary wire are completely
installed.
- Before starting the setup wizard, fi ll out the DEALER CHECKSHEET at the end of the Owner’s Manual.
- If the DEALER CHECKSHEET at the end of Owner’s Manual was already fi lled out by your dealer, refer to it
when confi guring the settings through the setup wizard.
- After the settings are fi nished through the setup wizard, you can modify the setting values in the menu
settings. For details, see “4. MENU SETTINGS” (M page 25).
1. Setting the Lawn layout
Through this setting, you can confi gure the information of your lawn layout for operating the lawn mower.
1-
1
Select [1.Setup wizard] and press the H button.
Setup wizard top screen is displayed.
Initial setup complete
1.Setup wizard
2.Restart initial setup
Finish
1-
2
[1.Lawn layout] is selected. Press the H button to
confi gure the lawn layout.
Lawn layout screen is displayed.
Setup wizard
1.Lawn layout
2.Mowing start points
3.Test start points
4.Work timer