38
Setting the lawn mower operation
Manual mode
With this function, you can confi gure the lawn mower to mow without the work
timer function.
NOTE:
- If you want to operate the lawn mower with [Manual mode], see “Operating the lawn mower with the Manual
mode” (M page 72)
Mowing pattern
You can select from 3 mowing patterns below:
[Directional]
With the [Directional] setting, when the
lawn mower detects the boundary wire, it
turns at a narrow angle. This is used for
mowing narrow areas.
[Random]
With the [Random] setting, when the lawn mower
detects the boundary wire, it turns at a wide angle.
This is the most effective for mowing a large open
area of grass. For normal operation, use this setting.
[Mixed]
With the [Mixed] setting, the lawn mower alternates between the [Random]
mowing pattern and the [Directional] mowing pattern at regular intervals.
Spiral cutting:
With this function, the lawn mower can be focused on mowing the area where the lawn is not completely
mown, or the growth speed of the lawn is fast.
The lawn mower detects the
dense area and mow there
spirally.
Edge cutting:
With this function, you can mow the unmowed area along the boundary wire.
If the edge cutting setting
is enabled, the lawn mower
goes around your lawn along
the boundary wire to mow the
edge before starting the usual
mowing.
To Next Page
Loading...
