4 MENU SETTINGS
35
Setting the lawn mower operation
Home screen J [2.Lawn setup] J [1.Auto mode] J
[3.Advanced setting] J [2.Edge cutting]
With this function, you can mow the unmown area along the boundary wire.
If the edge cutting setting
is enabled, the lawn mower
goes around your lawn along
the boundary wire to mow the
edge before starting the usual
mowing.
If you set this function on, the lawn mower mows
along the boundary wire when the work timer starts
for the fi rst time on selected day(s).
You can also confi gure the day(s) of the week on
which you want the lawn mower to mow along the
boundary wire (2 days per week maximum).
1
Select [ON] or [OFF] for confi guring the edge
cutting, and press the H button.
If select [ON], go to step2. The unmown part
along the boundary wire will be neatly-mowed.
If select [OFF], you will return to the previous
screen. You can operate the lawn mower
normally without using the battery capacity for
this feature.
2
Select the day of the week on which you want
the lawn mower to run with the edge cutting
function, and press the H button.
3
Select [Finish] and press the H button.
Menu screen
To Next Page
Loading...
