36
Setting the lawn mower operation
Home screen J [2.Lawn setup] J [1.Auto mode] J
[3.Advanced setting] J [3.Spiral cutting]
With this function, the lawn mower can be focused on mowing the area where the lawn is
not completely mown, or the growth speed of the lawn is fast.
The lawn mower detects the
dense area and mow there
spirally.
With this function, you can concentrate the lawn
mower on mowing the dense area of lawn during the
normal operation.
1
Select [ON] or [OFF] for confi guring the spiral
cutting, and press the H button.
If you select [ON], go to step 2. The lawn mower
can be focused on mowing the area where the
lawn is not completely mown, or the growth
speed of the lawn is fast.
If you select [OFF], You will return to the previous
screen. You can operate the lawn mower
normally without using the battery capacity for
this feature.
2
Select [Normal] or [High] for confi guring the
sensitivity of detecting the density of lawn,
and press the H button.
3
Select [Finish] and press the H button.
Menu screen
To Next Page
Loading...
