Honda NU50 - Steering Head Bearings; Headlight Aim; Wheels;Tires

MAINTENANCE
STEERING HEAD BEARINGS
NOTE
Check
that the control cables do not interfer~
with the handlebar rotation.
Place the motorcycle on Ihe center stand.
Raise the front wheel off the ground by placing a
support under the engine.
Check that Ihe handlebar rOlates fmery.
If the handlebar moves unevenly, binds. or has
vertical movement, adjust the steering head bearing
by turning the steering head adjusting nut.
HEADLIGHT AIM
Adjust the headlight yertical and horizontal beam
with the adjusting screws.
NOTE
Adjust the
headHgl'll beam as specified bv local
laws and regulations.
..111 impro!JI!rly adjll.w!t/ helltllight mllY hlind
oll-comillg
dril'trs, Qr if mllY faif to lighr Ihe
rood
for II sofe distallct:.
WHEELS/TIRES
Check Ihe lire pressures.
NOTE
--,
Tire pressure should be checked when the tires
are COLD.
TIRE PRESSURES
Front: 125 kPa 11.25 kg/cm
1
•
18 psi!
Rear: 175 kPa 11.75 kg/cm
2
• 24 psi!
TIRE SIZES
Front: 2.25-16 (4PR)
Rear:
2.75-1414PR)
Check the tires for wear, damage or imbedded
objects.
~HONDA
~ NUSO· NUSOM
STEERING HEAD BEARINGS
VERTICAL
ADJUSTERS
I
HORIZONTAL
ADJUSTER
3-10
32 DQle 01 Issue; Nov .. 1981
@HONDA MOTOR CO.. LTD.