4 - 61
UPC-E1 Preamble
A preamble is a lead-in character for UPC-E1 symbols transmitted to the host device. The lead-in characters are
considered part of the symbol.
Data is sent to the host in the following format:
Select an option by scanning one of the bar codes shown below.
No Preamble [data]
System Character [schar] [data]
System Character and Country Code [country code] [schar] [data]
No UPC-E1 Preamble
* System Character
System Character and Country Code
(“0” for USA)
To Next Page
Loading...
