Honeywell 8650 - Enter Friendly Name or PIN Code

3 - 12
Enter Friendly Name or PIN Code
PIN Code
1. Scan the Set PIN Code bar code, then scan up to 16 alphanumeric characters to set the Bluetooth module PIN
Code.
1. Scan the numbers, lowercase alpha and uppercase alpha bar codes.
2. When finished entering all characters, scan the Stop PIN Code setup bar code.
3. Scan the Stop PIN Code setup bar code to end PIN Code data entry.
The PIN Code default is 16 zeros (0000000000000000).
To reset the Pin Code back to the default, scan the Set Pin Code bar code and the Pin Code Default bar code only.
Set PIN Code
Pin Code Default
Stop PIN Code setup