4 - 6
Set Default Parameter
Restore Defaults
If custom defaults were set by scanning Write Custom Defaults, scan Restore Defaults to retrieve and restore the scanner’s
custom default settings. If no custom defaults were set, scan Restore Defaults to restore the factory default values.
Set Factory Defaults
Restore the factory default values. If custom defaults were set, they are eliminated.
Write Custom Defaults
Store the current scanner settings as custom defaults. Once custom default settings are stored, they can be recovered at
any time by scanning the Restore Defaults bar code.
See Also: Reset (page 2-10)
Restore Defaults
Set Factory Defaults
Write Custom Defaults
To Next Page
Loading...
