5 - 49
Code 11 Check Digit Verification
Enable this parameter by scanning either One Check Digit bar code or Two Check Digits bar code.
When enabled, this parameter checks the integrity of a Code 11 symbol to ensure it complies with the specified check digit
algorithm.
Note: Enable Code 11 Check Digit Verification when Transmit Code 11 Check Digits is enabled.
Set this parameter by scanning one of the bar codes shown below.
Transmit Code 11 Check Digits
Code 11 Check Digit Verification must be enabled for this parameter to function.
* Disable Code 11 Check Digit Verification
One Check Digit
Two Check Digits
Transmit (Enable) Code 11 Check Digits
* Do Not Transmit (Disable) Code 11 Check Digits
To Next Page
Loading...
