4 - 33
Code 128
Set this parameter by scanning either of the bar codes shown below.
GS1-128 (formerly UCC/EAN-128)
Set this parameter by scanning either of the bar codes shown below.
GS1-128 is a convention for printing data fields with standard Code 128 bar code symbols. GS1-128 symbols are dis-
tinguished by a leading FNC 1 character as the first or second character in the symbol. Other FNC 1 characters are
used to delineate fields.
When GS1-128 symbols are read, they are transmitted after special formatting strips off the leading FNC 1 character,
and replaces other FNC 1 characters with the ASCII 29 (GS) control character.
When AIM symbology identifiers are transmitted, the modifier character indicates the position of the leading FNC 1
character according to AIM guidelines. For example, ]c1 indicates a GS1-128 symbol with a leading FNC1 character.
Standard Code 128 bar codes which do not have a leading FNC 1 may still be used, but are not encoded according to
the GS1-128 convention. Standard Code 128 and GS1-128 may be mixed in an application. The SE955 autodiscrim-
inates between these symbols, and can enable or disable one or both code types.
* Enable Code 128
Disable Code 128
* Enable GS1-128
Disable GS1-128
To Next Page
Loading...
