4 - 12
Transmit AIM Code ID Character
Each AIM Code Identifier contains the three character string ]cm where:
]= Flag Character (ASCII 93)
c= Code Character
m= Modifier Character
The modifier character is the sum of the applicable option values based on the following table.
A Code 39
C Code 128
E UPC/EAN
F Codabar
G Code 93
H Code 11
I Interleaved 2 of 5
M MSI Plessey
S D2 of 5, IATA 2 of 5
X Code 39 Trioptic, Bookland EAN
e GS1 DataBar (RSS)
Code
Type
Option
Value
Option
Code 39
0 No Check character or Full ASCII processing.
1 Reader has checked one check character.
3 Reader has checked and stripped check character.
4 Reader has performed Full ASCII character conversion.
5 Reader has performed Full ASCII character conversion and checked one check character.
7 Reader has performed Full ASCII character conversion and checked and stripped check
character.
Example: A Full ASCII bar code with check character W,A+I+MI+DW, is transmitted as ]A7AimId
where 7 = (3+4).
Trioptic Code 39
0 No option specified at this time. Always transmit 0.
Example: A Trioptic bar code 412356 is transmitted as ]X0412356
Code 128
0 Standard data packet, No Function code 1 in first symbol position.
1 Function code 1 in first symbol character position.
2 Function code 1 in second symbol character position.
Example: A Code (EAN) 128 bar code with Function 1 character in the first position,
FNC1
Aim
Id is transmitted as ]ClAimId
To Next Page
Loading...
