4 - 13
According to AIM standards, a UPC with supplemental bar code is transmitted in the following format:
]EO (UPC chars) (terminator) ]E2 (supplemental) (terminator)
Therefore, a UPC with two supplemental characters, 01234567890510, is transmitted to the host as a 21-character
string, ]E00012345678905]E110.
Interleaved 2 of 5
0 No check digit processing.
1 Reader has validated check digit.
3 Reader has validated and stripped check digit .
Example: An I 2 of 5 bar code without check digit, 4123, is transmitted as ]I04123
Codabar
0 No check digit processing.
1 Reader has checked check digit.
3 Reader has stripped check digit before transmission.
Example: A Codabar bar code without check digit, 4123, is transmitted as ]F04123
Code 93
0 No options specified at this time. Always transmit 0.
Example: A Code 93 bar code 012345678905 is transmitted as ]G0012345678905
MSI (Plessey)
0 Single check digit checked.
1 Two check digits checked.
2 Single check digit verified and stripped before transmission.
3 Two check digits verified and stripped before transmission.
Example: An MSI Plessey bar code 4123, with a single check digit checked, is transmitted as
]M04123
Discrete 2 of 5
0 No options specified at this time. Always transmit 0.
Example: A D 2 of 5 bar code 4123, is transmitted as ]S04123
UPC/EAN
0 Standard packet in full EAN country code format, which is 13 digits for UPC-A and UPC-E (not
including supplemental data).
1 Two digit supplement data only
2 Five digit supplement data only
4 EAN-8 data packet.
Example: A UPC-A bar code 012345678905 is transmitted as ]E00012345678905
Bookland EAN
0 No options specified at this time. Always transmit 0.
Example: A Bookland EAN bar code 123456789X is transmitted as ]X0123456789X
Code
Type
Option
Value
Option
To Next Page
Loading...
