Honeywell 8650 - Code 11 Check Digit Verification; Transmit Code 11 Check Digits

4 - 32
Code 11 Check Digit Verification
When enabled, this parameter checks the integrity of a Code 11 symbol to ensure it complies with the specified check
digit algorithm.
Note: Enable “Code 11 Check Digit Verification” when “Transmit Code 11 Check Digits” is enabled.
Set this parameter by scanning one of the bar codes shown below.
Transmit Code 11 Check Digits
Note: Code 11 Check Digit Verification must be enabled for this parameter to function.
* Disable this feature
One Check Digit
Two Check Digits
Transmit (Enable)
* Do Not Transmit (Disable)