6 - 4
10. Browse to the driver location on the installation CD (/driver) or your hard drive, if the installation program was downloaded
to your hard drive, and click Next.
11. Click Continue Anyway when the dialog box appears stating “the driver has not passed Windows logo testing to verify
compatibility”.
12. Select Finish on the next dialog box.
13. Navigate to the Windows Device Manager screen. On Windows XP devices, one path to the Device Manager screen is
Start > Control Panel > System > Hardware tab and click the Device Manager button. Shown below is a sample of a
Device Manager screen.
14. Click the plus sign next to Universal Serial Bus controllers. Verify the BTRS Ringscanner in DFU mode is present. Close
all open windows and return to the PC desktop.
15. You are ready to update the Bluetooth Ring Scanner module firmware.
To Next Page
Loading...
