What does it mean when all bays and IntelliFlash light for 5 seconds on Honeywell Gas Detectors?
If all bays and IntelliFlash light for 5 seconds on your Honeywell Gas Detectors, it indicates that all sensors have failed. Replace the sensor or the PCBA to resolve this issue.
What does it mean when Honeywell BW Icon side LEDs and IntelliFlash light and sound five short beeps?
If the detector, side LEDs, and IntelliFlash light for 5 seconds, and sound five short beeps on your Honeywell Gas Detectors, it indicates a data flash failure. Replace the PCBA to fix this.
What does it mean when BLE icon and IntelliFlash light for 5 seconds on Honeywell BW Icon?
If the BLE icon and IntelliFlash light for 5 seconds on your Honeywell Gas Detectors, it indicates a BLE (Bluetooth Low Energy) failure. Replace the PCBA to resolve this issue.
General| Ingress Protection | IP66/67 |
|---|---|
| Operating Temperature | -40°C to +60°C (-40°F to +140°F) |
| Warranty | 2 years |
| Humidity Range | 5% to 95% RH (non-condensing) |
| Detection Gases | H2S, CO, O2 |
| Battery Life | 2 years (typical) |
| Alarm Type | Visual, audible, and vibrating alarms |
| Sensor Type | Electrochemical |
| Certifications | ATEX, IECEx, CSA, CE |
Critical safety precautions for operating the detector and its lithium battery.
Step-by-step guide on how to turn on the Honeywell BW™ Icon detector.
To Next Page
