Honeywell CloudLink 5G - Page 28

Honeywell | 28
6 Electrical Assembly
Error code
Description
Bit Number Corresponding Decimal Value Displayed error code on LEDs
Network regis-
tration fail
7 64 32
Alarm call
voltage low
8 128 33
Example 1:
Instance: SIM Card Error
Modem displays Error Code 21 : 2 Red blinks, followed by 5 seconds pause, and then followed by 1
Red blink.
Item 3160 value will display '0000000004' in MasterLink desktop application.
Example 2:
Instance : Self test failure
Modem displays Error Code 11 : 1 Red blink, followed by 5 seconds pause, and then followed by 1
Red blink.
Item 3160 value will display '0000000000' in MasterLink desktop application.