Honeywell | 30
7 Firmware Upgrade Over-The-Air (FOTA)
v. The FOTA process will commence (at default time - 30 days).
vi. Wait for 5 minutes for the radio firmware upgrade to complete.
b. Case Scenario 2: (Quick or Immediate)
i. Enable i3142 Value (Continuous Server Mode)
ii. Enable i3180 Value (to initiate FOTA).
iii. Enable i3179 Value (Quick or immediate FOTA).
iv. Give the HTTP host name in item number i3227. For example,
"http://192.168.0.100:4403/", where 192.168.0.100 is the HTTP server IP
address and 4403 is the HTTP port number.
v. Write the latest Application FW version number in the AppVersion.txt file and
place it in the HTTP server.
vi. Wait for 5 minutes for the radio firmware upgrade to complete.
You can check the current firmware version of the FOTA in the MasterLink application using item
number i3096.
To Next Page
Loading...