84 CT40/CT40 XP Mobile Computer Series User Guide
10. Review the items you have configured. If you need to change a setting, tap the
Back button to return to the relevant screen.
Tap Confirmed, start staging now! to begin. Wi-Fi Staging starts a hotspot on
the server device and wait for clients to connect.
11. Proceed to Set Up Client Devices on page 85.
Configurations are distributed to any client that connects to the server device.
Once the data transmission finishes successfully, the name and serial number of
the configured client is displayed in the Wi-Fi Staging app on the server device and
the client device skips the Android setup wizard.
Note: If you included a file’s hash in Step 8, Wi-Fi Staging will validate that the hash of the
file downloaded to a device matches what you specified. If the downloaded file’s hash
does not match, the file will be removed from the device.
Advanced Configuration
Advanced configuration allows you to stage your devices with one of more .xml files
created by EZConfig or Enterprise Provisioner. For more information about
generating .xml files, see the PowerTools User Guide or Enterprise Provisioner User
Guide.
Note: Advanced Configuration supports .xml files only. Other file types are ignored.
Note: Do not change the default names of .xml files. For example, DeviceConfig.xml is
acceptable, but DeviceConfig1.xml is not.
1. Choose one device to act as the server.
2. Tap Settings > Honeywell Settings > Wi-Fi Staging to launch Wi-Fi Staging on
the server.
3. Tap Advanced Configs.
4. Tap File directory.
5. Specify where on the server device the .xml files to be downloaded are located.
6. Tap NEXT.
7. Choose the files to be applied. Tap NEXT.
8. Review the files you have selected. If you need to change any files, tap the Back
button.
Otherwise, tap Confirmed, start staging now! to begin. Wi-Fi Staging starts a
hotspot on the server device and waits for clients to connect.
9. Proceed to Set Up Client Devices on page 85.
To Next Page
Loading...
