CT40/CT40 XP Mobile Computer Series User Guide 83
Basic Configuration
Basic configuration includes the most common system settings.
1. Tap Settings > Honeywell Settings > Wi-Fi Staging to launch the Wi-Fi
Staging app on the server device.
2. Tap Basic Configs to start the configuration wizard.
3. Select system language. Tap to add a language. At least one language must
be selected. Tap NEXT.
4. Select connection preferences. Enable Bluetooth and/or NFC. They are
disabled by default. Tap NEXT.
5. Select sound preferences. Adjust the default volume for each type of audio by
dragging the slider, and then tap NEXT.
6. Enable the location switch. It is disabled by default. Tap NEXT.
7. Set up Network & Internet connection or tap SKIP to proceed to Step 9 if you
do not want to set up a network connection.
You would need to set up a Network & Internet connection if you want to
register devices to an MDM system or the devices being registered need to use
applications that require network access.
If you want to set up devices to connect to a Wi-Fi access point, enter the
network information:
a. Tap Wi-Fi Security and select either OPEN or WPA/WPA2.
b. Enter the Wi-Fi SSID, and then tap OK. This field cannot be left empty.
c. Enter the Wi-Fi password. The password must be between 8 and 63
characters long. If you select WPA/WPA2, a password is required.
d. Tap NEXT.
8. The Files & Apks option only appears if you chose to set up Network & Internet
connections in step 7.
Enter the locations (URLs) of the Files & Apks that you want downloaded.
• The URL should end with the file that you want to download.
Wi-Fi Staging names the downloaded file with the file name in the URL.
• (Optional) You can include a file’s hash in the file name. Wi-Fi Staging
supports hash algorithms SH1 and SHA256.
• For security, Only Local Area Network URLs are supported for security.
Wi-Fi Staging ignores URLs from Wide Area Networks.
• Supported network protocols include HTTP or HTTPS.
• APK files are installed silently and automatically after download.
9. Final Setting: Select whether you want to reboot the device after staging is
complete. You can also specify an action (intent) to launch Android activities.
To Next Page
Loading...
