EasyManuals Logo

Honeywell Dolphin CN80 Series User Manual

Honeywell Dolphin CN80 Series
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
Dolphin CN80 Mobile Computer 15
For maximum battery life, charge the battery at 20 °C (68 °F) to 25 °C (77 °F)
and store at 10 °C (50°F) with a 30% charge.
Do not store the battery at temperatures above 50 °C (122°F). Storage above
50 °C (122°F) may damage the battery.
Charge the battery before use. Battery ships with only a partial charge.
See About the optional Dust Cover on page 7 for approved charging methods.
Use of this battery in other devices could result in damage to the device or
battery.
Avoid dropping the battery or computer. If you suspect that the battery or
computer is damaged, send it to a Honeywell service center for inspection.
Replace the battery only with another CW-BAT model battery. This battery has
been tested in accordance with applicable safety standards. Contact your
Honeywell sales representative or distributor if this battery is no longer
available. For more information, see Battery Part Numbers on page 7.
Discarded batteries may create a safety hazard. Before disposal, cover the
battery contacts with electrical insulating tape.
Do not modify the battery or attempt to insert foreign objects into it.
Do not solder directly to the battery contacts.
Do not drop, apply pressure, or other mechanical shock to the battery.
Do not disassemble or open, crush, bend or deform, puncture, shred or burn the
battery.
Do not incinerate, microwave, throw into a fire, or expose batteries to
temperatures above the documented maximum rating.
Do not disassemble a battery or try to open or penetrate its housing.
Do not immerse the battery pack in water or get the battery pack wet before
proper installation in the computer.
Power On the Computer
After you have fully charged and installed a battery, power on the computer for the
first time:
•Press and hold the Power button for approximately 3 seconds, and then release
the button.
Warning: If you have a CN80 NI/CN80G model certified for use in
hazardous locations, read About the optional Dust Cover,page
7.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell Dolphin CN80 Series and is the answer not in the manual?

Honeywell Dolphin CN80 Series Specifications

General IconGeneral
BrandHoneywell
ModelDolphin CN80 Series
CategoryPDA
LanguageEnglish

Related product manuals