Dolphin CN80 Mobile Computer 37
About Status Bar Icons
Status and notification icons show you the current status of your network, the
battery, notifications, and sounds. Use the table below to understand some of the
most common icons.
Status and Notification Icons
Remap a Button or Key
You can change the default function of the physical buttons and keys.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings > Honeywell Settings > Key Remap.
3. Tap the plus sign (+).
4. Press the button or key you want to remap.
5. Tap OK.
6. Tap Keys or Applications to view the available functions.
7. Select the function you want assigned to the button. The function you selected
now appears next to the button or key name.
Icon Description Icon Description
Pending alarm and Alarm is set Vibrate mode is turned On
New text message or multimedia
message
Airplane mode is turned On.
Error with text or multimedia message
delivery
Bluetooth is turned On.
New email SD card is full
Computer is connected to a PC with a
USB cable
Wi-Fi network connected with full
signal strength
Synchronizing data WiFi network connected but no signal
strength
Error with sync or sign-in Phone connected with full amount of
bars.
Computer is connected with Ethernet Phone connected with full amount of
bars but no Internet connection.
To Next Page
Loading...
