Dolphin CN80 Mobile Computer 85
6. When the scanner is successfully paired with the computer, the scanner name
appears under Connected Device.
Unpair a Paired Scanner
You can unpair the scanner to remove it from the Connected Device list.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Scanner Edge .
3. Tap the menu icon and then tap Disconnect BT Scanner.
4. Tap Honeywell or Intermec.
•Scan the Scan to disconnect barcode displayed on screen.
About Serial and USB Communications
You can use these Dolphin CX80 series accessories to transmit data to and receive
data from another device through serial or USB communications:
•Vehicle dock
•Home Base
• Ethernet Home Base
• USB snap-on adapter
USB Troubleshooting
• If you have a problem with your workstation computer recognizing the USB
device, try downloading and installing the Honeywell-aidc-usb-driver. The
To Next Page
Loading...
