28 Dolphin CN80 Mobile Computer
Insert a microSD Card
You can use a microSD card to increase file storage capacity or to install software.
Honeywell recommends the use of Single Level Cell (SLC) industrial grade
microSD or microSDHC memory cards with the computer for maximum
performance and durability.
Note: Format the memory card before initial use.
1. Save your files and close any open applications.
2. Press and hold the Power button until the options menu appears.
3. Tap Power Off.
4. Release one end of the hand strap.
5. Slide the battery latch to the right.
Update Tap to apply changes made to settings.
Default Tap to set the Heater settings back to their default values.
Heater Setting Description
Caution: Always power off the computer before attempting to install or
remove a card.
Warning: If you have a CN80 NI/CN80G model certified for use in
hazardous locations, read About the optional Dust Cover,page
7.
To Next Page
Loading...
