To Next Page

To Previous Page

32 107026-11-EN FR26 ROW 302 Printed in France

6. Device Identification

Emitter and receiver each carry two plates:

• Rating Plate and approval plate

L: Scanning range (m)

H: Protection height (mm)

øR: Resolution (mm)

Type : Product listing

V: Power supply voltage

P: Power consumption

F: Power supply frequency

Imax./Vmax: Max. switching capacity of the output relays

N°: Serial number and date code (month and year)

T: Response time (ms)

IP/NEMA: Sealing

PlaqSB14

Table of Contents3
Statutory Provisions5
Conformity to the European Directives5
Use5
Installation5
Important Remarks on Safety5
Description6
General6
Principle of Operation6
Electronic System6
Model Reference6
Installation7
Statutory Mounting Provisions7
Protected Height9
Range10
Remarks - Advice on Use13
Grouping of Several FF-SB14 Safety Barriers14
Electrical Connection15
Conditions of Use15
Electrical Connection for Plastic Connector Versions (DIN 43651)16
Emitter Main Supply Plug (See § 4.2.4)16
Receiver Main Supply Plug (See § 4.2.4)16
Receiver Signal Plug16
Electrical Power Supply16
Machine Stop Control17
Use of Auxillary N.C. Contacts (Pins 1 and 2 of Receiver Signal Plug)18
Test Input18
Example of Electrical Interface Involving Additional Relaying19
Example 2: the Following Example Performs the same Functions as in the First Example but It Takes into Account the Secondary Switching Device20
Electrical Connection for Metal Connector Versions (DIN 43652)21
Emitter Supply Plug (FF-SB14E ❏❏❏ -S2 ❏ ) (See § 4.3.3)21
Receiver Supply and Signal Plug (FF-SB14R ❏❏❏ -S2 ❏ ) (See § 4.3.3)21
Electrical Power Supply21
Machine Stop Control22
Use of Auxillary N.C. Contact (Pins A1 and A2)23
Beam Status Output (Available on FF-SB14R ❏❏❏ -S2 ❏ Models Only)23
Test Input23
Automatic Restart/Start & Restart Interlock (Available on FF-SB14R ❏❏❏ -S2 ❏ Models Only)24
Monitoring / Reset (Available on FF-SB14R ❏❏❏ -S2 ❏ Models Only)24
Examples of Electrical Interfaces Involving Additional Relaying25
Setting up32
Front Panel Indicators32
Optical Alignment34
Check List of the Installation35
Compliance with Mechanical Installation35
Compliance with Electrical Installation35
Powering up35
Device Identification36
Troubleshooting37
Inspection and Maintenance39
Inspection39
Cleaning39
Changing a Supply Fuse40
Changing Output Relays41
Changing a Transparent Front Plate41
Changing the Jumper Links Position (for Models with DIN 43652 Connectors Only)43
List of Devices, Accessories and Spares, and Warranty Conditions44
Barriers44
Accessories44
Spare Parts45
Technical Specifications46
Warranty Information48
Warranty and Remedy48
Sales and Service48
Ec Declaration of Conformity49

Brand	Honeywell
Model	FF-SB12 Series
Category	Security Sensors
Language	English

Honeywell FF-SB12 Series Installation And Maintenance Manual

Table of Contents

Other manuals for Honeywell FF-SB12 Series

Questions and Answers:

Honeywell FF-SB12 Series Specifications

Related product manuals