Programming
132 MS-9050UD PN 52413:C 01/23/08
1. The FACP will not transmit a TOTAL COMM FAULT message to the Central Station upon
communication restoral. This event code is used only for a local indication of a communication
fault.
POWER MON 330
MON-USER-DEF-14 330
TROUBLE MON POINT_FAULT code will always be transmitted
MON-USER-DEF-15 POINT_FAULT code will always be transmitted
PROCESS MON 000
MON-USER-DEF-16 000
PROCMON AR 000
MON-USER-DEF-17 000
not used 000
not used 000
POINT_FAULT 380
POINT_DISABLE 570
AC_FAIL 301
DRILL 604
SLC 1 OPEN FAULT 371
SLC 1 SHORT FAULT 372
GROUND FAULT 310
LOW BATTERY 302
NO_BATTERY 311
TELCO LINE 1 351
TELCO LINE 2 352
COMM FAULT 1 354
COMM FAULT 2 354
TOTAL COMM FLT
1
000
PRINTER FAULT 336
NAC 1 FAULT 321
NAC 2 FAULT 322
27V SYS PWR FAULT 300
not used 000
NAC 1 DISABLE 521
NAC 2 DISABLE 522
CS CALC FAULT 304
CHARGER FAULT 300
OPTION CARD 1 FAULT 331
ANN-BUS PWR FAULT 333
ZONE DISABLE 570
MODEM CHIP FAULT 330
ANN-BUS COMM FAULT 333
NO_DEVICES_INSTLLD 380
OFF_NORMAL_MESSAGE 308
24_HOUR_TEST 602
24 HOUR ABNORMAL TES 608
UPDOWN REQUEST 411
UPLOAD SUCCESS 416
DOWNLOAD SUCCESS 412
UPDOWN FAILURE 413
GENERAL_ALARM 000
GENERAL_SUPERVISORY 000
Table 3.5 Event Codes (continued)
To Next Page
Loading...
