94 HH492 User Guide
GS1 Composite Code Message Length
Scan the barcodes below to change the message length. Refer to Message Length
Description (page 58) for additional information. Minimum and Maximum
lengths = 1-2435. Minimum Default = 1, Maximum Default = 2435.
GS1 Emulation
The scanner can automatically format the output from any GS1 data carrier to
emulate what would be encoded in an equivalent GS1-128 or GS1 DataBar symbol.
GS1 data carriers include UPC-A and UPC-E, EAN-13 and EAN-8, ITF-14, GS1-
128, and GS1 DataBar and GS1 Composites. (Any application that accepts GS1
data can be simplified since it only needs to recognize one data carrier type.)
If GS1-128 Emulation is scanned, all retail codes (U.P.C., UPC-E, EAN8, EAN13)
are expanded out to 16 digits. If the AIM ID is enabled, the value will be the GS1-
128 AIM ID, ]C1 (see Symbology Charts on page 121).
If GS1 DataBar Emulation is scanned, all retail codes (U.P.C., UPC-E, EAN8,
EAN13) are expanded out to 16 digits. If the AIM ID is enabled, the value will be the
GS1-DataBar AIM ID, ]em (see Symbology Charts on page 121).
If GS1 Code Expansion Off is scanned, retail code expansion is disabled, and UPC-
E expansion is controlled by the UPC-E0 Expand (page 79) setting. If the AIM ID is
enabled, the value will be the GS1-128 AIM ID, ]C1 (see Symbology Charts on page
121).
If EAN8 to EAN13 Conversion is scanned, all EAN8 barcodes are converted to
EAN13 format.
Default = GS1 Emulation Off.
To Next Page
Loading...
