Honeywell HH492 - Maxicode Message Length; Aztec Code; Aztec Code Message Length

HH492 User Guide 99
MaxiCode Message Length
Scan the barcodes below to change the message length. Refer to Message Length
Description (page 58) for additional information. Minimum and Maximum
lengths = 1-150. Minimum Default = 1, Maximum Default = 150.
Aztec Code
< Default All Aztec Code Settings >
Aztec Code On/Off
Aztec Code Message Length
Scan the barcodes below to change the message length. Refer to Message Length
Description (page 58) for additional information. Minimum and Maximum
lengths = 1-3832. Minimum Default = 1, Maximum Default = 3832.
Minimum Message Length
Maximum Message Length
* On
Off
Minimum Message Length
Maximum Message Length