64 HH492 User Guide
Code 39 Code Page
Code pages define the mapping of character codes to characters. If the data
received does not display with the proper characters, it may be because the
barcode being scanned was created using a code page that is different from the
one the host program is expecting. If this is the case, scan the barcode below,
select the code page with which the barcodes were created (see ISO 2022/ISO 646
Character Replacements on page 128), and scan the value and the Save barcode
from the Programming Chart, beginning on page 133. The data characters should
then appear properly.
Suppress Code 39
Note: It is recommended if you are reading Code 39 barcodes, Codablock A should remain
disabled.
The Do Not Suppress Code 39 setting allows you to scan a mix of Code 39 and
Codablock A barcodes. Once Codablock A is enabled, scan the Do Not Suppress
Code 39 barcode. Default = Suppress Code 39.
To Next Page
Loading...
