Honeywell HH492 - Chinese Sensible (Han Xin) Code; Han Xin Code On;Off; Han Xin Code Message Length

HH492 User Guide 101
Character Replacements on page 128), and scan the value and the Save barcode
from the Programming Chart, beginning on page 133. The data characters should
then appear properly.
Chinese Sensible (Han Xin) Code
< Default All Han Xin Settings >
Han Xin Code On/Off
Han Xin Code Message Length
Scan the barcodes below to change the message length. Refer to Message Length
Description (page 58) for additional information. Minimum and Maximum
lengths = 1-7833. Minimum Default = 1, Maximum Default = 7833.
Aztec Code Page
On
* Off
Minimum Message Length
Maximum Message Length