Honeywell HH492 - Data Matrix Message Length; Data Matrix Code Page; Maxicode; Maxicode On;Off

98 HH492 User Guide
Data Matrix Message Length
Scan the barcodes below to change the message length. Refer to Message Length
Description (page 58) for additional information. Minimum and Maximum
lengths = 1-3116. Minimum Default = 1, Maximum Default = 3116.
Data Matrix Code Page
Data Matrix Code pages define the mapping of character codes to characters. If the
data received does not display with the proper characters, it may be because the
barcode being scanned was created using a code page that is different from the
one the host program is expecting. If this is the case, scan the barcode below,
select the code page with which the barcodes were created (see ISO 2022/ISO 646
Character Replacements on page 128), and scan the value and the Save barcode
from the Programming Chart, beginning on page 133. The data characters should
then appear properly.
MaxiCode
< Default All MaxiCode Settings >
MaxiCode On/Off
Minimum Message Length
Maximum Message Length
Data Matrix Code Page
On
* Off