Honeywell HH492 - Beeper Pitch - Good Read; Beeper Pitch - Error

HH492 User Guide 15
Beeper Pitch – Good Read
The beeper pitch codes modify the pitch (frequency) of the beep the scanner emits
on a good read. Default = Medium.
Beeper Pitch – Error
The beeper pitch codes modify the pitch (frequency) of the sound the scanner
emits when there is a bad read or error. Default = Razz.
* High
Off
Low (1600 Hz)
* Medium (2400 Hz)
High (4200 Hz)
* Razz (250 Hz)
Medium (3250 Hz)
High (4200 Hz)