EasyManuals Logo

Honeywell NOTIFIER ID2000 Series Installation & Commissioning Manual

Honeywell NOTIFIER ID2000 Series
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
1
ID2000 Series Installation & Commissioning Manual
997-433-000-5, Issue 5
May 2010
Introduction
1 Introduction
The purpose of this manual is to provide the user with all
recommended procedure descriptions and full technical
details for the successful installation and commissioning
of NOTIFIER’s ID2000 Series stand-alone fire alarm
controllers and repeaters or for a complete ID2000 Series
integrated Fire Control System.
Procedures described in this manual include appropriate
warnings and cautions to guide the user towards adopting
safe and methodical work practices during the installation
and commissioning phases.
1.1 CE Marking
CE
This panel is CE Marked to show that it conforms to the
requirements of the following European Community
Directives:
The EMC Directive 2004/108/EEC, by the application of
the following EMC Standards:
! EN 61000-6-3: Electromagnetic Compatibility (EMC)
Generic emission standard for Residential,
Commercial and Light industrial environments
! EN 50130-4: EMC Product family standard: Immunity
requirements for components of fire, intruder and
social alarm systems.
Low Voltage Directive 2006/95/EC, by the application of
the safety standard:.
! EN 60950-1: Safety of information technology
equipment.
The Constructive Products Directive 89/1-6/EC, by the
application of the following standards:
! EN 54-2: Fire detection and fire alarm systems -
Control and indicating equipment.
! EN 54-4: Fire detection and fire alarm systems - Power
supply equipment.
1.2 System Design and Planning
It is assumed that the system, of which the ID2000 Series
fire control equipment is a part, has been designed by a
competent fire alarm system designer in accordance with
the requirements of EN54 Part 14 and any other local
codes of practice that are applicable.
The design drawings should clearly show the positions of
all the ID2000 Series control equipment and field devices.
1.3 Personnel
Installation of this product must be carried out only by
suitably-qualified electrical engineers.

Table of Contents

Other manuals for Honeywell NOTIFIER ID2000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell NOTIFIER ID2000 Series and is the answer not in the manual?

Honeywell NOTIFIER ID2000 Series Specifications

General IconGeneral
BrandHoneywell
ModelNOTIFIER ID2000 Series
CategoryControl Panel
LanguageEnglish

Related product manuals