ID3000/ID2000 Fire Panel Configuration Tool Manual
Historic Log
A1 - 8
997-291, Version 3.05
November 2010
Maintenance Log Menu
This menu has one option:
a. Data Request, which Displays the Request
Maintenance Log window. This allows the
panel’s maintenance log for SMART sensors
to be displayed in the Historic and Data Log
window. Select which sensors are included:
i Select ‘Scan the entire panel’ to display the
log for all SMART sensors on the panel.
ii Select ‘Devices to scan’, then select the loop
number and address at which the scan is
to start and the number of devices (that are
in a maintenance condition) from which log
data is to be obtained before the scan stops.
iii If the panel is connected to an ID
2
net
network, the log applicable to SMART
sensors on a remote panel can be
displayed. Select the appropriate node
(network address).
Select ‘Send’.
About Menu
This menu has the following options:
a. Version Info. Displays the version number
of the Historic & Data Log Tool.
b. Get Panel Version. Displays the software
version number in the Historic & Data Log
window.
i
ii
iii
To Next Page
Loading...
Need help?
General
