When first using the program, after installation, the only existing user is Notifier with a
default password. The Notifier user is named Administrator and has the highest level
that allows access to all program functions.
Then enter in the window of fig. 4.2:
User name: notifier Password:
543210
Fig. 4.3.b) Configuration program login screen.
After logging in, the user's name is displayed in the upper left-hand corner of the screen.
The visible options depend on the level of the logged-in user (see chapter "User
management application"). Figure 4.3.5) shows the options enabled for the Notifier user
in the main program screen.
4.3.1)
Central selection
Once you have logged in, you are presented with the screen for selecting the control
unit. It is possible to select the type of control unit from a list.
To Next Page
Loading...
Need help?
General
