Warning: load the last saved version of a NFG8 central unit configuration file. If you are
not sure to have in your computer the last configuration version of the NFG-8 central
unit on which you are operating, load the programming of the central unit through the
command "Load configuration from CPU" of the menu "Communication".
Or create a new configuration file using the "New" command in the "File" menu.
4.5.1)
System information
Fig. 4.5.1) System Information screen
If desired, complete the fields with the data concerning the company supplying the
system and the company where the system is installed. You may also enter the names
of the various people to be contacted.
To Next Page
Loading...
