92 UDACT Instruction Manual — P/N 50050:M 12/18/2009
NFS2-640, NFS-320, (UL 9th) and NFS-640 (UL 8th) Event Code/Report Transmission
F.5 Event Code/Report Transmission
Via Ademco Contact ID Format Only
F.5.1 For Zone Reporting:
Zones 1 - 99 report as zone numbers 01 - 99
F.5.2 For Point Reporting:
Loop 1, Modules 1 - 64 report as device numbers 001 - 064
Loop 2, Modules 1 - 64 report as device numbers 065 - 128
Loop 1, Modules 65 - 128 report as device numbers 129 - 192
Loop 2, Modules 65 - 128 report as device numbers 193 - 256
Loop 1, Modules 129 - 159 report as device numbers 257 - 287 (288 is not used)
Loop 2, Modules 129 - 159 report as device numbers 289 - 319 (320 is not used)
Loop 1, Detectors 1 - 64 report as device numbers 321 - 384
Loop 2, Detectors 1 - 64 report as device numbers 385 - 448
Loop 1, Detectors 65 - 128 report as device numbers 449 - 512
Loop 2, Detectors 65 - 128 report as device numbers 513 - 576
Loop 1, Detectors 129 - 159 report as device numbers 577 - 607 (608 is not used)
Loop 2, Detectors 129 - 159 report as device numbers 609 - 639 (640 is not used)
Use Table F.1 through Table F.7 as worksheets for the NFS2-640, NFS-640, and NFS-320.
NOTE: Loop 2 Reporting is only available for the NFS2-640 and NFS-640.
To Next Page
Loading...
