Honeywell PC42d - Stepper Motor Assembly

L3-GLBL-RPR-4260 (Rev A)
Tools Required
Description
Torx Driver
Phillips Driver
Parts Required
Item
Part Number
Description
Qty
1
50130724-001FRE
FRE, Stepper Motor, PC42d
1
2
50110527-001FRE?
FRE, Screw, M3 - 1.27X 10L, 100-Pack (torque value 9±0.45kgf/cm)
?
Stepper Motor Assembly Removal
1. Flip printer over and remove the 4 mounting screws. See Figure 1.
2. Disconnect stepper motor assembly cable from the MLB. See Figure 18.
3. Remove stepper motor assembly mounting screws. See Figure 19.
Figure 18 – Stepper Motor Assembly Connector
Figure 19 – Stepper Motor Assembly Mounting Screws Stepper Motor Assembly
1
OPERATION:
Stepper Motor Assembly
TITLE
Model
DOCUMENT NO.
PAGE
PC42d Service Repair Manual PC42d
L3-GLBL-RPR-4260
(Rev A)
Page 19 of 25