Honeywell PC42T User Manual

Chapter 1 — About the Printer
16 PC42t Desktop Printer User Guide
Connect the Printer to Power
1 Connect the power adapter to the power port on the rear of the
printer.
2 Connect the power adapter to AC power. When the adapter is
connected to AC power, the green LED in the adapter connector
turns on and stays on.
3 Press the Power switch to turn the power on. As the printer starts up,
the green LED turns on and blinks.
The green LED turns on solid green when the printer is ready to print.
You can now set the printer command language or a print a configuration
label. For help, see “How to Set the Printer Command Language” on
page 17 or “About Test Labels” on page 19.
About Printer Command Languages
A printer command language is a set of instructions that controls printer
functions:
• Configure the printer.
• Return the status of the printer.
• Control peripheral devices.
• Format a label or receipt for printing.
The printer supports these command languages and language simulator
support options:
• Direct Protocol (DP)
• ESim (EPL command language simulator)
• ZSim (ZPL command language simulator)
Caution: Use only the AC power adapter supplied with the printer.
The use of a power adapter not approved by Honeywell voids the
product warranty and may damage the printer.
Caution: Turn the printer off when not in use.

Honeywell PC42T Specifications

General

Color	No
Print technology	Thermal transfer
Maximum resolution	203 x 203 DPI
Maximum print height	- mm
Maximum printing width	104.1 mm
Certification	UL, cUL, cULus, CE, FCC, D Mark CCC, KCC, RCM
Internal memory	64 MB
Built-in barcodes	1D, 2D, Code 49, Data Matrix, EAN13, EAN8, MaxiCode, QR Code
Display	LED
Product color	Black
Ethernet LAN	Yes
Optional connectivity	Ethernet, Parallel, Serial (RS-232)
USB 2.0 ports quantity	1
Connectivity technology	Wired
Ribbon width	109.2 mm
Core diameter	25.4 mm
Ribbon length	300 m
Maximum label width	110 mm
Maximum media length	9.6 mm
Maximum roll diameter	127 mm
Supported paper width	25.4 - 110 mm
Input current	1.5 A
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
AC adapter output current	2.5 A
AC adapter output voltage	24 V
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	5 - 40 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Depth	297 mm
Width	226 mm
Height	177 mm
Weight	2500 g