Appendix A — Specifications
42 PC42t Desktop Printer User Guide
Printer Specifications
PC42t Physical Specifications
Dimensions: 226 mm x 297 mm x 175 mm
(8.9 in x 11.7 in x 6.9 in)
Weight: 2.5 kg (5.5 lbs)
Power Supply Requirements: 100–240 VAC, 50–60 Hz, 1.5 A
Operating Temperature: 5 °C to 40 °C (41 °F to 104 °F)
Storage Temperature: -40 °C to 60 °C (-40 °F to 140 °F)
Relative Humidity: 15 to 80% non-condensing
PC42t Print Speed, Resolution, and General Media Specifications
Print Mode: Direct thermal, thermal transfer
Print Speed (variable): 50, 75, and 100 mm/sec (2, 3, and 4 ips)
Print Resolution: 203 dpi: 8 dots/mm
Print Width: 104 mm (4.09 in) max
Media Width: 25.4 to 110 mm (0.99 to 4.33 in)
Label Roll Diameter (maximum): 127 mm (5 in)
Label Length (minimum): 9.60 mm (.34 in)
Gap Length Between Labels: 2 to 4.5 mm (0.08 to 0.18 in)
Black Mark Length: 3 to 5 mm (0.12 to 0.19 in) can be adjusted from
center to extreme left
Media Thickness: 0.0762 to 0.254 mm (3 to 10 mil)
Liner Opacity (maximum): 76% (TAPPI T425)
Ribbon Width: 30 to 110 mm (1.18 to 4.33 in)
Ribbon Roll Diameter (maximum): 68 mm (2.68 in)
Ribbon Core (I.D.): 25.2 to 25.6 mm (0.99 to 1.01 in)
Ribbon Core Length: 30 to 110 mm (1.18 to 4.33 in) notched or notchless
Ribbon Wound Ink Side: Out only
To Next Page
Loading...
