Honeywell PC42T - Manage IO Settings; Manage Services Settings

Appendix B — Default Settings
54 PC42t Desktop Printer User Guide
Manage I/O Settings
This section describes system I/O settings for the printer. To view these
settings:
• From the printer web page, click the Configure tab > System
Settings > Manage I/O.
Manage Services Settings
This section lists the system services you can manage from the printer.
You will only see Manage Services from the menus if you have an
Ethernet module installed in the printer. To view these services:
• From the printer web page, click the Configure tab > System
Settings > Manage Services.
Manage I/O Settings
Setting Description Default
Ethernet Allows the printer to communicate using
Ethernet.
Enable
Manage Services Settings
Setting Description Default
Web Server Determines if the web server is enabled in the
printer.
Enable
FTP Determines if the printer can use FTP (File
Transfer Protocol).
Enable
Net1 Determines if the printer can use Telnet to
communicate with Direct Protocol (Fingerprint).
Enable
LPR Determines if the printer can use the LPR (Line
Printer Server) daemon.
Enable
Telnet Determines if the printer can use Telnet to
communicate with another device.
Enable